Free_fall

config/machine_settings/st-ten-11.ini

@@ -46,7 +46,8 @@ risoluzione:300
 
 [digital_io]
 # OUTPUT MAP FOR FIXTURE CONNECTOR
-id: USB-5862,BID#0
+id: USB-5860,BID#0
+first_output: 0
 
 
 [fixture_rfid]

src/components/usb_586x.py

@@ -53,7 +53,7 @@ class USB_586x(Component):
         self.info.ModuleIndex = 0
 
         self.open_device()
-        #self.out_bits = self.config["digital_outputs"]
+        self.out_bits = self.config[self.name]
         #self.in_bits = self.config["digital_inputs"]
 
         # SET ALL RELAYS OFF

src/ui/test_leak/test_leak.py

@@ -5,7 +5,7 @@ import os
 
 from PyQt5.QtGui import QPixmap
 from PyQt5.QtWidgets import QMessageBox, QDialog, QApplication
-from PyQt5.QtCore import Qt, pyqtSlot
+from PyQt5.QtCore import Qt, pyqtSlot, QTimer
 from ui import Dialog
 from ui.test_instructions_reminder import Test_Instructions_Reminder
 from ui.test_test import Test_Test
@@ -30,6 +30,13 @@ class Test_Leak(Test_Test):
         # Connect to the tecna_error_signal to handle connection issues
         self.components[self.tester_component].tecna_error_signal.connect(self.handle_modbus_error)
 
+    def _test_output_sequence(self, step):
+        """Sets the first digital output of the usb_586x based on the step type."""
+        if step.step_type == "test_freefall_leak":
+            self.set_digital_out("first_output", 1) # Set high
+        else:
+            self.set_digital_out("first_output", 0) # Set low
+
     def show_instruction(self):
         dialog=Dialog()
         dialog.setCentralWidget(Test_Instructions_Reminder(recipe=self.parent.recipe,bench_name=self.parent.config.machine_id))
@@ -88,6 +95,7 @@ class Test_Leak(Test_Test):
 
 
     def start(self, recipe=None, step=None, pieces=None):
+        self._test_output_sequence(step) # Call with the step object
         # TESTING
         if "--test-leak" in sys.argv:
             self.simulate = True
@@ -263,6 +271,7 @@ class Test_Leak(Test_Test):
         self.components[self.tester_component].stop_test()
         self.components[self.tester_component].pause()
         self.disconnect(self.get_connection)
+        self.set_digital_out("first_output", 0) # Set low when test stops
         super().stop()
         self.start_b.setEnabled(False)
         self.stop_b.setEnabled(False)
@@ -488,7 +497,7 @@ class Test_Leak(Test_Test):
                 QMessageBox.warning(self, "Avviso", text)
             QApplication.processEvents()
 
-    def set_digital_out(self,out_name=None,state=1,component_name="digital_io_flush_blow"):
+    def set_digital_out(self,out_name=None,state=1,component_name="digital_io"):
         if self.io_ok:
             bit = int(self.parent.config[component_name][out_name])
             ret = self.components[component_name].set_bit_verify(0,bit,state)