wip
This commit is contained in:
matteo porta
parent
2578a4b773
commit
b44005ed05
|
|
@ -44,6 +44,7 @@ printer: ttp247
|
|||
|
||||
|
||||
[tecna_t3]
|
||||
model: t3p
|
||||
; port: ?
|
||||
baudrate: 115200
|
||||
admin_pin: 603
|
||||
|
|
|
|||
|
|
@ -10,6 +10,7 @@ vision_saver: present
|
|||
vision: present
|
||||
|
||||
[tecna_t3]
|
||||
model: t3l
|
||||
port: /dev/ttyUSB0
|
||||
|
||||
[multicomp]
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ from .neo_pixels import NeoPixels
|
|||
from .os_label_printer import Os_Label_Printer
|
||||
from .remote_api import RemoteAPI
|
||||
from .serial_label_printer import Serial_Label_Printer
|
||||
from .tecna_marposs_provaset_t3p import TecnaMarpossProvasetT3P
|
||||
from .tecna_marposs_provaset_t3 import TecnaMarpossProvasetT3
|
||||
from .test_component import TestComponent
|
||||
from .vision import Vision
|
||||
from .vision_saver import VisionSaver
|
||||
|
|
|
|||
|
|
@ -31,10 +31,10 @@ class Component(QObject):
|
|||
# self.log.exception(f"self: {self}, reconfigurators: {Component.reconfigurators}, reconfiguration loop")
|
||||
Component.reconfigurators_lock.unlock()
|
||||
try:
|
||||
ret = f(*arg, **kwargs)
|
||||
return f(*arg, **kwargs)
|
||||
except Exception:
|
||||
self.log.exception(traceback.format_exc())
|
||||
return ret
|
||||
return None
|
||||
Component.reconfigurators.add(self)
|
||||
Component.reconfigurators_lock.unlock()
|
||||
t_limit = 3
|
||||
|
|
|
|||
|
|
@ -1,6 +1,7 @@
|
|||
from .component import Component
|
||||
from .modbus_component import ModbusComponent
|
||||
from .tecna_marposs_provaset_t3p_registers import registers
|
||||
from .tecna_marposs_provaset_t3l_registers import registers as t3l_registers
|
||||
from .tecna_marposs_provaset_t3p_registers import registers as t3p_registers
|
||||
|
||||
# from pymodbus.client.sync import ModbusSerialClient as ModbusClient
|
||||
# import serial
|
||||
|
|
@ -9,9 +10,9 @@ from .tecna_marposs_provaset_t3p_registers import registers
|
|||
# client.read_holding_registers(1, count=1)
|
||||
|
||||
|
||||
class TecnaMarpossProvasetT3P(ModbusComponent):
|
||||
class TecnaMarpossProvasetT3(ModbusComponent):
|
||||
def __init__(self, config=None, name=None, period=1, lazy=True, paused=False, threaded=True):
|
||||
super().__init__(config=config, name=name, period=period, lazy=lazy, paused=paused, threaded=threaded, registers=registers)
|
||||
super().__init__(config=config, name=name, period=period, lazy=lazy, paused=paused, threaded=threaded, registers=None)
|
||||
|
||||
# pin_registers = {
|
||||
# "admin_pin": "PASSWORD: Administration", # was 1909
|
||||
|
|
@ -27,6 +28,13 @@ class TecnaMarpossProvasetT3P(ModbusComponent):
|
|||
# "select_pin": self.config.get("select_pin", None),
|
||||
# }
|
||||
# self.unlock_tecna()
|
||||
self.model = self.config[self.name]["model"].lower()
|
||||
if self.model == "t3p":
|
||||
self.registers = t3p_registers
|
||||
elif self.model == "t3l":
|
||||
self.registers = t3l_registers
|
||||
else:
|
||||
raise NotImplementedError(f"techna t3 model {self.model!r} not implemented.")
|
||||
self.set_measure_units()
|
||||
self.units = self.get_measure_units()
|
||||
self.log.info(f"units: {self.units}")
|
||||
|
|
@ -44,7 +52,7 @@ class TecnaMarpossProvasetT3P(ModbusComponent):
|
|||
_leak_flow_units = {"cm3/min": 0, "cm3/h": 1, }
|
||||
_volume_units = {"litri": 0, "cm3": 1, }
|
||||
_time_units = {"seconds": 0, }
|
||||
_flow_units = {"liters/min": 0, "liters/h": 1, "m3/h": 2, }
|
||||
_flow_units = {"liters/min": 0, "liters/h": 1, "m3/h": 2, "cfm": 3}
|
||||
_pressure_units_map = {v: k for k, v in _pressure_units.items()}
|
||||
_leak_units_map = {v: k for k, v in _leak_units.items()}
|
||||
_leak_flow_units_map = {v: k for k, v in _leak_flow_units.items()}
|
||||
|
|
@ -53,6 +61,7 @@ class TecnaMarpossProvasetT3P(ModbusComponent):
|
|||
_flow_units_map = {v: k for k, v in _flow_units.items()}
|
||||
|
||||
def set_measure_units(self):
|
||||
if self.model == "t3p":
|
||||
for register, [unit, decimals] in {
|
||||
"MEASURE UNITS: Relative pressure": [self._pressure_units["mbar"], 0], # red, purple
|
||||
"MEASURE UNITS: Differential (leak) pressure": [self._leak_units["mbar"], 0], # yellow
|
||||
|
|
@ -61,9 +70,21 @@ class TecnaMarpossProvasetT3P(ModbusComponent):
|
|||
"MEASURE UNITS: Flow rate": [self._flow_units["liters/min"], 0], # orange
|
||||
}.items():
|
||||
self.write(register, (decimals << 8) + unit)
|
||||
elif self.model == "t3l":
|
||||
for register, [unit, decimals] in {
|
||||
"MEASURE UNITS: Relative pressure": [self._pressure_units["mbar"], 0], # red, purple
|
||||
"MEASURE UNITS: Differential (leak) pressure": [self._leak_units["mbar"], 0], # yellow
|
||||
"MEASURE UNITS: Calculated leak flow rate": [self._leak_flow_units["cm3/min"], 0], # blue
|
||||
"MEASURE UNITS: Volume": [self._volume_units["litri"], 0], # green
|
||||
"MEASURE UNITS: Flow rate": [self._flow_units["liters/min"], 0], # orange
|
||||
}.items():
|
||||
self.write(register, unit) # (decimals << 8) + unit)
|
||||
else:
|
||||
raise NotImplementedError(f"techna t3 model {self.model!r} not implemented.")
|
||||
|
||||
def get_measure_units(self):
|
||||
units = {}
|
||||
if self.model == "t3p":
|
||||
for [register, unit_map, unit_names] in [
|
||||
["Running test: relative pressure format", self._pressure_units_map, ["relative_pressure", "red", "r", 21, ]], # also by documentation color and register number
|
||||
["Running test: differential pressure format", self._pressure_units_map, ["differential_pressure", "purple", "p", 22, ]], # also by documentation color and register number
|
||||
|
|
@ -77,6 +98,27 @@ class TecnaMarpossProvasetT3P(ModbusComponent):
|
|||
unit_spec = [10**(-((v >> 8) & 0xff)), unit_map[v & 0xff]]
|
||||
for unit_name in unit_names:
|
||||
units[unit_name] = unit_spec
|
||||
elif self.model == "t3l":
|
||||
for [register, unit_map, unit_names] in [
|
||||
[["Running test: relative pressure scale", "Running test: relative pressure decimals"], self._pressure_units_map, ["relative_pressure", "red", "r", 1501, ]], # also by documentation color and register number
|
||||
[["Running test: differential pressure scale", "Running test: differential pressure decimals"], self._pressure_units_map, ["differential_pressure", "purple", "p", 1503, ]], # also by documentation color and register number
|
||||
[["Running test: relative pressure scale (low resolution)", "Running test: relative pressure decimals (low resolution)"], self._leak_units_map, ["relative_pressure_lr", "yellow", "y", 1505, ]], # also by documentation color and register number
|
||||
["Running test: calculated leak flow rate format", self._leak_flow_units_map, ["leak_flow", "blue", "b", 1507, ]], # also by documentation color and register number
|
||||
["Running test: volume format", self._volume_units_map, ["volume", "green", "g", 1508, ]], # also by documentation color and register number
|
||||
["Running test: time format", self._time_units_map, ["time", "orange", "t", 1509, ]], # also by documentation color and register number
|
||||
["Running test: flow rate format", self._flow_units_map, ["flow", "white", "o", 1510, ]], # also by documentation color and register number
|
||||
["Running test: line pressure format", self._pressure_units_map, ["line_pressure", "lp", "l", 1511, ]], # also by documentation color and register number
|
||||
]:
|
||||
if type(register) is list:
|
||||
v = [self.read(r) for r in register]
|
||||
unit_spec = [10**(-(v[1] & 0xff)), v[0]]
|
||||
else:
|
||||
v = self.read(register)
|
||||
unit_spec = [10**(-((v >> 8) & 0xff)), unit_map[v & 0xff]]
|
||||
for unit_name in unit_names:
|
||||
units[unit_name] = unit_spec
|
||||
else:
|
||||
raise NotImplementedError(f"techna t3 model {self.model!r} not implemented.")
|
||||
return units
|
||||
|
||||
def _convert_from_format(self, data, formatting=None, decoding_map=None):
|
||||
|
|
@ -184,6 +226,14 @@ class TecnaMarpossProvasetT3P(ModbusComponent):
|
|||
"Running test: test type",
|
||||
"Running test: sequence index",
|
||||
]}
|
||||
if self.model == "t3p":
|
||||
pass
|
||||
elif self.model == "t3l":
|
||||
info.update({r: self.read(r) for r in [
|
||||
"Active not severe alarm flags",
|
||||
]})
|
||||
else:
|
||||
raise NotImplementedError(f"techna t3 model {self.model!r} not implemented.")
|
||||
if info["Running test: active phase"] == "FINE TEST": # "END TEST, WAITING THE START OF A NEW TEST":
|
||||
info.update(self.get_test_results())
|
||||
self.log.debug(str(info))
|
||||
|
|
@ -220,7 +270,7 @@ class TecnaMarpossProvasetT3P(ModbusComponent):
|
|||
"Test program for read/write operation": table,
|
||||
**{719 - 1 + i: (recipe_name[i * 2 + 1] << 8) + recipe_name[i * 2] for i in range(8)},
|
||||
"Test type": "Leak Test",
|
||||
"Test flags": 0b0110000001011100,
|
||||
"Test flags": 0b0110000001011111,
|
||||
"T0 - Pre-filling time": step.spec["pre_filling_time"],
|
||||
"P0 - Pre-filling pressure": step.spec["pre_filling_pressure"],
|
||||
"T1 - Filling time": step.spec["filling_time"],
|
||||
|
|
@ -234,6 +284,16 @@ class TecnaMarpossProvasetT3P(ModbusComponent):
|
|||
"FST - Discharge time": step.spec["flush_time"],
|
||||
"FSL - Discharge limit": step.spec["flush_pressure"],
|
||||
}
|
||||
if self.model == "t3p":
|
||||
pass
|
||||
elif self.model == "t3l":
|
||||
spec.update({
|
||||
"Use programs or use products": 0,
|
||||
"Nominal peak pressure": step.spec["test_pressure"],
|
||||
"Pn - Nominal test pressure": step.spec["test_pressure"],
|
||||
})
|
||||
else:
|
||||
raise NotImplementedError(f"techna t3 model {self.model!r} not implemented.")
|
||||
self.log.debug(str(spec))
|
||||
for register, value in spec.items():
|
||||
self.write(register, value)
|
||||
332
src/components/tecna_marposs_provaset_t3l_registers.py
Normal file
332
src/components/tecna_marposs_provaset_t3l_registers.py
Normal file
|
|
@ -0,0 +1,332 @@
|
|||
# WARNING: ALL REGISTER IN THE DOCUMENTATION ARE SHIFTED BY ONE (NUMERATION STARTS BY ONE)
|
||||
registers = {
|
||||
"Instrument type": [1 - 1, {"dt": "16bit_uint", }],
|
||||
"Test counter: FAILED": [2 - 1, {"dt": "32bit_uint", }],
|
||||
"Test counter: TOTAL TESTS": [4 - 1, {"dt": "32bit_uint", }],
|
||||
"Life counter: FAILED": [6 - 1, {"dt": "32bit_uint", }],
|
||||
"Life counter: TOTAL TESTS": [8 - 1, {"dt": "32bit_uint", }],
|
||||
"Real time test pressure output": [11 - 1, {"dt": "32bit_int", "f": 1501, }],
|
||||
"Real time differential pressure output": [13 - 1, {"dt": "32bit_int", "f": 1503, }],
|
||||
"Real time pressure line regulator": [15 - 1, {"dt": "16bit_int", "f": 1511}],
|
||||
"Active alarm flags": [16 - 1, {"dt": "16bit_uint", }],
|
||||
# | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
||||
# | | | | | | | EA | E9 | E8 | | E6 | E5 | E4 | E3 | E2 | E1 |
|
||||
# E1: Test program error
|
||||
# E2: Setting parameters memory error
|
||||
# E3: Sensor calibration memory error
|
||||
# E4: Emergency
|
||||
# E5: I2c bus
|
||||
# E6: Flow sensor
|
||||
# E8: A/D_FS points
|
||||
# E9: Sensor comm. Ch1
|
||||
# EA: Sensor comm. Ch2
|
||||
"Active not severe alarm flags": [21 - 1, {"dt": "16bit_uint", }],
|
||||
# | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
||||
# | | | | | | | | | A8 | A7 | A6 | A5 | A4 | A3 | A2 | A1 |
|
||||
# A1: Discharge alarm (ch 1 for 2 channel model)
|
||||
# A2: Discharge alarm (ch 2 for 2 channel model)
|
||||
# A3: Acknowledgment
|
||||
# A4: Cage closing automation alarm
|
||||
# A5: Cage opening automation alarm
|
||||
# A6: Plug closing automation alarm
|
||||
# A7: Plug opening automation alarm
|
||||
# A8: I2C no stop
|
||||
"Running test: relative pressure scale": [1501 - 1, {"dt": "16bit_uint", }], # red
|
||||
"Running test: relative pressure decimals": [1502 - 1, {"dt": "16bit_uint", }], # red
|
||||
"Running test: differential pressure scale": [1503 - 1, {"dt": "16bit_uint", }], # purple
|
||||
"Running test: differential pressure decimals": [1504 - 1, {"dt": "16bit_uint", }], # purple
|
||||
"Running test: relative pressure scale (low resolution)": [1505 - 1, {"dt": "16bit_uint", }], # yellow
|
||||
"Running test: relative pressure decimals (low resolution)": [1506 - 1, {"dt": "16bit_uint", }], # yellow
|
||||
"Running test: calculated leak flow rate format": [1507 - 1, {"dt": "16bit_uint", }], # blue
|
||||
"Running test: volume format": [1508 - 1, {"dt": "16bit_uint", }], # green
|
||||
"Running test: time format": [1509 - 1, {"dt": "16bit_uint", }], # orange
|
||||
"Running test: flow rate format": [1510 - 1, {"dt": "16bit_uint", }], # white
|
||||
"Running test: line pressure format": [1511 - 1, {"dt": "16bit_uint", }], # lp
|
||||
# 1531-1540 last test values formats ----- add if needed
|
||||
"Active test program number": [31 - 1, {"dt": "16bit_uint", }],
|
||||
"Running test: active phase": [32 - 1, {"dt": "16bit_uint", "decoding": {
|
||||
0: "ATTESA START", # "WAITING START",
|
||||
10: "CONTROLLO BARCODE", # "CHECK BARCODE",
|
||||
20: "ATTESA BARCODE", # "WAITING BARCODE",
|
||||
30: "START TEST",
|
||||
35: "MOVE TABLE START",
|
||||
40: "START CAGE",
|
||||
50: "START PLUG",
|
||||
60: "START SEQUENCE PROGRAM",
|
||||
70: "WAIT DELAY ACKNOWLEDGE COMMAND",
|
||||
80: "WAIT DELAY",
|
||||
90: "WAIT ACKNOWLEDGE",
|
||||
100: "T0 PRE-RIEMPIMENTO", # "T0 PRE-FILL",
|
||||
110: "T1 RIEMPIMENTO", # "T1 FILLING",
|
||||
120: "T2 ASSESTAMENTO", # "T2 SETTLING",
|
||||
130: "T3 MISURA", # "T3 MEASURE",
|
||||
140: "WAITING OPERATOR RESULT ACKNOWLEDGE",
|
||||
150: "RESULT PRESENT",
|
||||
160: "MARKING",
|
||||
170: "DISCHARGE",
|
||||
180: "END SEQUENCE PROGRAM",
|
||||
181: "SEQUENCE DELAY",
|
||||
182: "PREPARE SEQUENCE PROGRAM",
|
||||
190: "END PLUG",
|
||||
200: "END CAGE",
|
||||
205: "MOVE TABLE END",
|
||||
210: "FINE TEST", # "END TEST, WAITING THE START OF A NEW TEST",
|
||||
}, }],
|
||||
"Running test: phase backwards time": [33 - 1, {"dt": "16bit_uint", "f": 1509, }],
|
||||
"Running test: filling pressure": [34 - 1, {"dt": "32bit_int", "f": 1501, }],
|
||||
"Running test: pressure at the end of settling": [36 - 1, {"dt": "32bit_int", "f": 1501, }],
|
||||
"Running test: burst pressure": [38 - 1, {"dt": "32bit_int", "f": 1501, }],
|
||||
"Running test: measured leak": [40 - 1, {"dt": "32bit_int", "f": 1503, }],
|
||||
"Running test: calculated leak flow rate": [42 - 1, {"dt": "32bit_int", "f": 1507, }],
|
||||
"Running test: calculate RVP%": [44 - 1, {"dt": "32bit_int", }],
|
||||
"Running test: result": [46 - 1, {"dt": "16bit_uint", "decoding": {
|
||||
1: "LEAK TEST PASSED (also used in Volume+Leak tests)",
|
||||
2: "BURST TEST PASSED WITH BURST",
|
||||
3: "BURST TEST PASSED WITHOUT BURST",
|
||||
4: "APERTURE TEST PASSED",
|
||||
5: "BLOCKAGE TEST PASSED",
|
||||
6: "FLOW TEST PASSED",
|
||||
7: "LEAK with FLOW TEST PASSED",
|
||||
99: "PRODUCT PASSED",
|
||||
# 100: "LEAK TEST FAILED (T3D: Maximum leak in test port, T3P: Upper limit error with negative Q+ parameter)",
|
||||
100: "LEAK TEST FAILED (Upper limit error with negative Q+ parameter)",
|
||||
# 101: "LEAK TEST FAILED (only in T3P: Upper limit with positive Q+ parameter)",
|
||||
101: "LEAK TEST FAILED (Upper limit with positive Q+ parameter)",
|
||||
# 102: "LEAK TEST FAILED (T3D: Maximum leak in reference port, T3P: Maximum leak)",
|
||||
102: "LEAK TEST FAILED (Maximum leak)",
|
||||
103: "BURST TEST FAILED (Burst pressure under the minimum)",
|
||||
104: "VOLUME TEST FAILED (Maximum RVP tolerance)",
|
||||
105: "APERTURE TEST FAILED - MINIMUM (not used)",
|
||||
106: "APERTURE TEST FAILED - MAXIMUM (not used)",
|
||||
107: "BLOCKAGE TEST FAILED (Maximum pressure)",
|
||||
108: "BLOCKAGE TEST FAILED (Minimum pressure)",
|
||||
109: "BURST TEST FAILED (Minimum test pressure not reach)",
|
||||
110: "FLOW TEST - PRESSURE FAIL - (Pressure out of programmed tolerance)",
|
||||
111: "FLOW TEST - FLOW FAIL - (Flow out of programmed tolerance)",
|
||||
112: "FAILED - LEAKAGE MAX",
|
||||
113: "FAILED - LEAKAGE MIN",
|
||||
115: "FAILED MIN CH1",
|
||||
116: "FAILED ANOMALY CH2",
|
||||
117: "FAILED MIN CH2",
|
||||
118: "FAILED BOTH CHANNELS",
|
||||
119: "FAILED FLOW MAX",
|
||||
120: "FAILED FLOW MIN",
|
||||
121: "FAILED PEAK MAX",
|
||||
122: "FAILED PEAK MIN",
|
||||
123: "(FAILED, SERVICE ONLY)",
|
||||
199: "FAILED PRODUCT",
|
||||
200: "FAIL T1/T2 PRESSURE UNDER TOLERANCE",
|
||||
201: "FAIL T1/T2 PRESSURE OVER TOLERANCE",
|
||||
202: "FAIL BLOCKAGE START PRESSURE UNDER TOLERANCE",
|
||||
203: "FAIL BLOCKAGE START PRESSURE OVER TOLERANCE",
|
||||
204: "FAIL WITH ALARM",
|
||||
205: "FAIL RELATIVE PRESSURE OVER SCALE",
|
||||
206: "FAIL DIFFERENTIAL PRESSURE OVER SCALE",
|
||||
207: "FAIL PRE-FILL VALVE NOT OPENED",
|
||||
208: "FAIL INVALID PROGRAM PARAMETERS",
|
||||
209: "FAIL CONFIGURATION PARAMETERS",
|
||||
210: "FAIL ALL CALIBRATION",
|
||||
211: "FAIL I2C COMMUNICATION",
|
||||
212: "FAIL EMERGENCY",
|
||||
213: "FAIL BYPASS VALVE NOT OPEN",
|
||||
214: "FAIL FLOW OUT OF RANGE",
|
||||
215: "FAIL FLOW SENSOR ALARM",
|
||||
216: "FAIL AD SPI ALARM",
|
||||
217: "FAIL (SERVICE ONLY)",
|
||||
250: "TEST ABORTED",
|
||||
}, }],
|
||||
"Running test: test type": [47 - 1, {"dt": "16bit_uint", "decoding": {
|
||||
1: "LEAK",
|
||||
2: "BLOCKAGE",
|
||||
3: "LEAK + VOLUME CHECK",
|
||||
4: "BURST",
|
||||
5: "APERTURE (SERVICE ONLY)",
|
||||
6: "FLOW RATE",
|
||||
7: "LEAK + FLOW",
|
||||
}, }],
|
||||
"Running test: sequence index": [48 - 1, {"dt": "16bit_uint", }],
|
||||
"PRESSURE PLOT: Sampling frequency in 1/10 s": [49 - 1, {"dt": "16bit_uint", }],
|
||||
"PRESSURE PLOT: Number of available sampling": [50 - 1, {"dt": "16bit_uint", }],
|
||||
# Note: plot values are available from Modbus register 2001 to 8000 as signed 32 bit values. ----- add if needed
|
||||
# 81-86 real time clock ----- add if needed
|
||||
# 64-80 87-92 last test values ----- add if needed
|
||||
# ------------------------- COMMANDS -------------------------
|
||||
"Start test": [101 - 1, {"dt": "16bit_uint", }],
|
||||
# Write 0 to start the selected program
|
||||
# Write a different number from 1 to n max programs to start a specific program.
|
||||
"Reset running test": [102 - 1, {"dt": "16bit_uint", }],
|
||||
"Activate specific digital output": [103 - 1, {"dt": "16bit_uint", }],
|
||||
# Write the number from 1 to 16 of the digital output to activate (must be set as Free in Settings)
|
||||
"Reset specific digital output": [104 - 1, {"dt": "16bit_uint", }],
|
||||
# Write the number from 1 to 16 of the digital output to reset (must be set as Free in Settings)
|
||||
"Activate digital output (bit mask)": [105 - 1, {"dt": "16bit_uint", }],
|
||||
# Write 1 in the bit corresponding to the output to be activated
|
||||
"Reset digital output (bit mask)": [106 - 1, {"dt": "16bit_uint", }],
|
||||
# Write 1 in the bit corresponding to the output to be deactivated
|
||||
"Reset test counter": [107 - 1, {"dt": "16bit_uint", }],
|
||||
# Write any U16 number to reset tests counters
|
||||
# ------------------------------------------------------------
|
||||
"Language": [601 - 1, {"dt": "16bit_uint", "encoding": {
|
||||
"ITALIAN": 0,
|
||||
"ENGLISH": 1,
|
||||
"FRENCH": 2,
|
||||
"SIMPLIFIED CHINESE": 3,
|
||||
"SPANISH": 4,
|
||||
"NOT AVAILABLE": 5,
|
||||
"GERMAN": 6,
|
||||
"JAPANESE": 7,
|
||||
}, "decoding": {
|
||||
0: "ITALIAN",
|
||||
1: "ENGLISH",
|
||||
2: "FRENCH",
|
||||
3: "SIMPLIFIED CHINESE",
|
||||
4: "SPANISH",
|
||||
5: "NOT AVAILABLE",
|
||||
6: "GERMAN",
|
||||
7: "JAPANESE",
|
||||
}, }],
|
||||
"Source of test program number selection": [602 - 1, {"dt": "16bit_uint", "encoding": {
|
||||
"FROM PARAMETER (SET BY LCD OR SERIAL LINE)": 0,
|
||||
"BCD BASE 1, FROM DIGITAL INPUTS (PLC INTERFACE)": 1,
|
||||
"BCD BASE 0, FROM DIGITAL INPUTS (PLC INTERFACE)": 2,
|
||||
}, "decoding": {
|
||||
0: "FROM PARAMETER (SET BY LCD OR SERIAL LINE)",
|
||||
1: "BCD BASE 1, FROM DIGITAL INPUTS (PLC INTERFACE)",
|
||||
2: "BCD BASE 0, FROM DIGITAL INPUTS (PLC INTERFACE)",
|
||||
}, }],
|
||||
"Selected program": [603 - 1, {"dt": "16bit_uint", }],
|
||||
# 1- n max programs
|
||||
"Selected program": [603 - 1, {"dt": "16bit_uint", }],
|
||||
# 1- n max programs
|
||||
"Use programs or use products": [604 - 1, {"dt": "16bit_uint", }],
|
||||
# 0: the Start command will run the active program (see reg. 101 to set the program number)
|
||||
# 1: the Start command will run the active product (see reg. 101 to set the product number)
|
||||
"Flag: Instrument settings": [605 - 1, {"dt": "16bit_uint", }],
|
||||
# | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
||||
# | | | | | | | | | | PID NR | QE | RF | RP | | DM | SB |
|
||||
# Bit 0: 1= Start button
|
||||
# Bit 1: 1= Demo mode
|
||||
# Bit 3: 1= Reset if test passed
|
||||
# Bit 4: 1= Reset if test failed
|
||||
# Bit 5: 1= QLP Extra digit activated
|
||||
# Bit 6: 1= Leak in pressure per second
|
||||
# Bit 7: 1= Leak in flow rate unit
|
||||
"MEASURE UNITS: Relative pressure": [606 - 1, {"dt": "16bit_uint", }],
|
||||
# 0=mH2O 1=mbar 2=kPa 3=mmHg 4=inH2O 5=psi 6=mmH2O
|
||||
"MEASURE UNITS: Differential (leak) pressure": [607 - 1, {"dt": "16bit_uint", }],
|
||||
# 0=mmH2O 1=mbar 2=Pa 3=mmHg 4=inH2O 5=psi
|
||||
"MEASURE UNITS: Calculated leak flow rate": [608 - 1, {"dt": "16bit_uint", }],
|
||||
# 0=cm3/min 1=cm3/h
|
||||
"MEASURE UNITS: Volume": [609 - 1, {"dt": "16bit_uint", }],
|
||||
# 0=litre 1=cm3
|
||||
"MEASURE UNITS: Flow rate": [617 - 1, {"dt": "16bit_uint", }],
|
||||
# 0=liters/min 1=liters/h 2=m3/h
|
||||
"Cage automation: closing time": [618 - 1, {"dt": "16bit_uint", "g": 10, }],
|
||||
# Format: x.x seconds
|
||||
"Cage automation: opening time": [619 - 1, {"dt": "16bit_uint", "g": 10, }],
|
||||
# Format: x.x seconds
|
||||
"Maximum pressure limit": [620 - 1, {"dt": "16bit_uint", "f": 1505, }],
|
||||
"Plug automation: closing time": [621 - 1, {"dt": "16bit_uint", "g": 10, }],
|
||||
# Format: x.x seconds
|
||||
"Plug automation: opening time": [622 - 1, {"dt": "16bit_uint", "g": 10, }],
|
||||
# Format: x.x seconds
|
||||
"Marker: result based driving": [623 - 1, {"dt": "16bit_uint", }],
|
||||
# 0=Only passed
|
||||
# 1=Only failed
|
||||
# 2=All
|
||||
"Marker: driving time": [624 - 1, {"dt": "16bit_uint", "g": 10, }],
|
||||
# Format: x.x seconds
|
||||
"PASSWORD: Administration": [631 - 1, {"dt": "32bit_uint"}],
|
||||
# 1 - 999999
|
||||
"PASSWORD: Modify program": [633 - 1, {"dt": "32bit_uint"}],
|
||||
# 1 - 999999
|
||||
"PASSWORD: Select program": [635 - 1, {"dt": "32bit_uint"}],
|
||||
# 1 - 999999
|
||||
"Test program for read/write operation": [700 - 1, {"dt": "16bit_uint", }],
|
||||
# 1- n max programs
|
||||
"Test type": [701 - 1, {"dt": "16bit_uint", "encoding": {
|
||||
"Leak Test": 1,
|
||||
"Blockage": 2,
|
||||
"Volume+Leak": 3,
|
||||
"Burst": 4,
|
||||
"Aperture": 5,
|
||||
# "Flow (T3PF)": 6,
|
||||
"Flow": 6,
|
||||
# "Leak with Flow (T3PF)": 7,
|
||||
"Leak with Flow": 7,
|
||||
}, "decoding": {
|
||||
1: "Leak Test",
|
||||
2: "Blockage",
|
||||
3: "Volume+Leak",
|
||||
4: "Burst",
|
||||
5: "Aperture",
|
||||
# 6: "Flow (T3PF)",
|
||||
6: "Flow",
|
||||
# 7: "Leak with Flow (T3PF)",
|
||||
7: "Leak with Flow",
|
||||
}, }],
|
||||
"Test flags": [702 - 1, {"dt": "16bit_uint", }],
|
||||
# | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 6 5 4 | 3 | 2 | 1 | 0 |
|
||||
# | CX | HR | AT | Q- | Q+ | B | Pr- | P0- | PID MODE | T3/Q | | T1/Pr | T0/Pr |
|
||||
# T0/Pr: Filling mode 0=TIME 1=PRESSURE (*)
|
||||
# T1/Pr: Filling mode 0=TIME 1=PRESSURE (*)
|
||||
# T1/Pr (T3LPQ) = 0 - 250 (seconds)
|
||||
# T3/Q: Fail mode 0=TIME 1=PRESSURE (*)
|
||||
# PID MODE: 0=FAST 1=MEDIUM 2=SLOW 4 = FIXED 5 = AUTOMATIC 6 = FLOW 7 = LEAK WITH
|
||||
# -----
|
||||
# FLOW
|
||||
# P0-: 0= P0 pre-filling pressure is positive 1=P0 pre-filling pressure is negative (vacuum)
|
||||
# Pr-: 0= Pr filling pressure is positive 1=Pr filling pressure is negative (vacuum)
|
||||
# B: = beep (not used)
|
||||
# Q+: Negative Q+ parameter
|
||||
# Q-: Negative Q- parameter
|
||||
# AT: Pressure tare
|
||||
# HR: Enable pressure high resolution (depends on the model) (QLP / QHD)(*)
|
||||
# CX: Test channel - Select used channel (in two channels models in T3P2C)
|
||||
# (*) = not available on T3LPQ model
|
||||
"T0 - Pre-filling time": [704 - 1, {"dt": "16bit_uint", "f": 1509, }],
|
||||
"P0 - Pre-filling pressure": [705 - 1, {"dt": "16bit_uint", "f": 1505, }],
|
||||
# To set a negative pressure (vacuum) this parameters must be written in absolute value and then set bit P0- in register 702
|
||||
"T1 - Filling time": [706 - 1, {"dt": "16bit_uint", "f": 1509, }],
|
||||
"T2 - Settling time": [707 - 1, {"dt": "16bit_uint", "f": 1509, }],
|
||||
"T3 - Measure time": [708 - 1, {"dt": "16bit_uint", "f": 1509, }],
|
||||
"PREL - Nominal test pressure": [709 - 1, {"dt": "16bit_uint", "f": 1505, }],
|
||||
# To set a negative pressure (vacuum) this parameters must be written in absolute value and then set bit Pr- in register 702
|
||||
"PR- - Min pressure tolerance %": [710 - 1, {"dt": "16bit_uint", "g": 10, }],
|
||||
# Format: x.x %
|
||||
# NOTE: In blockage test minimum final pressure (format as indicated in register 1505)
|
||||
"Q+ Upper test leak limit": [711 - 1, {"dt": "16bit_uint", "f": 1503, }],
|
||||
"Q- Lower test leak limit": [712 - 1, {"dt": "16bit_uint", "f": 1503, }],
|
||||
"FST - Discharge time": [713 - 1, {"dt": "16bit_uint", "f": 1509, }],
|
||||
"CV - Volumetric coefficient": [714 - 1, {"dt": "16bit_uint", "f": 1508, }],
|
||||
"P% Pressure tol. (blockage test)": [717 - 1, {"dt": "16bit_uint", "g": 10, }],
|
||||
"Nominal peak pressure": [718 - 1, {"dt": "16bit_uint", "f": 1505, }],
|
||||
# Format: x.x %
|
||||
"AW: Aperture weight time (AT)": [740 - 1, {"dt": "16bit_uint", }],
|
||||
"AN: Aperture number": [741 - 1, {"dt": "16bit_uint", }],
|
||||
# Format x
|
||||
"Pn - Nominal test pressure": [742 - 1, {"dt": "16bit_uint", "f": 1505, }],
|
||||
"PB - Burst pressure": [743 - 1, {"dt": "16bit_uint", "f": 1505, }],
|
||||
"BD - Burst drop / PD - Delta Aperture": [744 - 1, {"dt": "16bit_uint", "f": 1505, }],
|
||||
"FSL - Discharge limit": [745 - 1, {"dt": "16bit_uint", "f": 1505, }],
|
||||
"PID: pressure correction": [746 - 1, {"dt": "16bit_uint", "g": 100, }],
|
||||
# Offset electronic regulator Format: xx.xx%
|
||||
"PR+ - Max pressure tolerance % (P+)": [747 - 1, {"dt": "16bit_uint", "g": 10, }],
|
||||
# Format: x.x %
|
||||
# NOTE: In blockage test maximum final pressure (format as indicated in register 1505)
|
||||
"AV1: Advanced valve time": [748 - 1, {"dt": "16bit_uint", "g": 10, }],
|
||||
# Format: x.x seconds
|
||||
"AV2: Advanced valve time": [749 - 1, {"dt": "16bit_uint", "g": 10, }],
|
||||
# Format: x.x seconds
|
||||
"RVP%: volumetric ratio": [750 - 1, {"dt": "16bit_uint", "g": 100, }],
|
||||
# Format: x.xx (Range from 100.00 to 649.99)
|
||||
"RVP%: max tolerance": [751 - 1, {"dt": "16bit_uint", "g": 100, }],
|
||||
# Format: x.xx (Range from 0.10 to 50.00)
|
||||
"T0 Steps - T0 Step %": [752 - 1, {"dt": "16bit_uint", }],
|
||||
# | 15 14 13 12 11 10 9 8 | 7 6 5 4 3 2 1 0 |
|
||||
# | Step % T0 | T0 Steps |
|
||||
"T1 Steps - T1 Step %": [753 - 1, {"dt": "16bit_uint", }],
|
||||
# | 15 14 13 12 11 10 9 8 | 7 6 5 4 3 2 1 0 |
|
||||
# | Step % T1 | T1 Steps |
|
||||
"Sequence": [754 - 1, {"dt": "16bit_uint", }],
|
||||
}
|
||||
|
|
@ -49,7 +49,7 @@ registers = {
|
|||
180: "END SEQUENCE PROGRAM",
|
||||
190: "END PLUG",
|
||||
200: "END CAGE",
|
||||
210: "FINE TEST", # "WAITING THE START OF A NEW TEST",
|
||||
210: "FINE TEST", # "END TEST, WAITING THE START OF A NEW TEST",
|
||||
}, }],
|
||||
"Running test: phase backwards time": [33 - 1, {"dt": "16bit_uint", "f": 26, }],
|
||||
"Running test: filling pressure": [34 - 1, {"dt": "32bit_int", "f": 21, }],
|
||||
|
|
@ -178,7 +178,7 @@ registers = {
|
|||
# Format: x.x seconds
|
||||
"Cage automation: opening time": [619 - 1, {"dt": "16bit_uint", "g": 10, }],
|
||||
# Format: x.x seconds
|
||||
"Maximum pressure limit": [620 - 1, {"dt": "16bit_uint", }],
|
||||
"Maximum pressure limit": [620 - 1, {"dt": "16bit_uint", "f": 23, }],
|
||||
"Plug automation: closing time": [621 - 1, {"dt": "16bit_uint", "g": 10, }],
|
||||
# Format: x.x seconds
|
||||
"Plug automation: opening time": [622 - 1, {"dt": "16bit_uint", "g": 10, }],
|
||||
|
|
@ -190,8 +190,11 @@ registers = {
|
|||
"Marker: driving time": [624 - 1, {"dt": "16bit_uint", "g": 10, }],
|
||||
# Format: x.x seconds
|
||||
"PASSWORD: Administration": [631 - 1, {"dt": "32bit_uint"}],
|
||||
# 1 - 999999
|
||||
"PASSWORD: Modify program": [633 - 1, {"dt": "32bit_uint"}],
|
||||
# 1 - 999999
|
||||
"PASSWORD: Select program": [635 - 1, {"dt": "32bit_uint"}],
|
||||
# 1 - 999999
|
||||
"Test program for read/write operation": [700 - 1, {"dt": "16bit_uint", }],
|
||||
# 1- n max programs
|
||||
"Test type": [701 - 1, {"dt": "16bit_uint", "encoding": {
|
||||
|
|
@ -217,7 +220,7 @@ registers = {
|
|||
}, }],
|
||||
"Test flags": [702 - 1, {"dt": "16bit_uint", }],
|
||||
# | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 6 5 4 | 3 | 2 | 1 | 0 |
|
||||
# | CH | HR | AT | Q- | Q+ | | Pr- | P0- | PID MODE | T3/Q | FSM | T1/Pr | |
|
||||
# | CH | HR | AT | Q- | Q+ | | Pr- | P0- | PID MODE | T3/Q | FSM | T1/Pr | T0/Pr |
|
||||
# CH: Select used channel (in two channels models as T3P2C)
|
||||
# HR: Enable pressure high resolution (depends on the model)
|
||||
# AT: Pressure auto tare
|
||||
|
|
@ -258,7 +261,7 @@ registers = {
|
|||
"PV%": [742 - 1, {"dt": "16bit_uint", "g": 10, }],
|
||||
# Set of electronic regulator in blockage test (Format x.x %)
|
||||
"PB - Minimum burst pressure": [743 - 1, {"dt": "16bit_uint", "f": 23, }],
|
||||
"BD - Burst gap / PD Delta Aperture": [744 - 1, {"dt": "16bit_uint", "f": 23, }],
|
||||
"BD - Burst gap / PD - Delta Aperture": [744 - 1, {"dt": "16bit_uint", "f": 23, }],
|
||||
"FSL - Discharge limit": [745 - 1, {"dt": "16bit_uint", "f": 23, }],
|
||||
"RP% - Pressure ratio": [746 - 1, {"dt": "16bit_uint", "g": 100, }],
|
||||
# Format; x.xx %
|
||||
|
|
|
|||
|
|
@ -54,7 +54,7 @@ try:
|
|||
# IMPORT PROJECT ONLY AFTER SETTING UP SIGNAL, FAULTHANDLER AND LOGGHING
|
||||
from components import (ArchiveSynchronizer, GalaxyCamera, Multicomp730424,
|
||||
NeoPixels, Os_Label_Printer, RemoteAPI,
|
||||
TecnaMarpossProvasetT3P, Vision, VisionSaver)
|
||||
TecnaMarpossProvasetT3, Vision, VisionSaver)
|
||||
from lib.db import Users
|
||||
from lib.helpers import ConfigReader
|
||||
from PyQt5.QtCore import QObject, QThread, pyqtSignal
|
||||
|
|
@ -83,7 +83,7 @@ try:
|
|||
"multicomp": {"c": Multicomp730424, "k": {"paused": True}},
|
||||
"neo_pixels": {"c": NeoPixels, "t": False},
|
||||
"remote_api": {"c": RemoteAPI, "k": {"main": self}},
|
||||
"tecna_t3": {"c": TecnaMarpossProvasetT3P, "k": {"paused": True}},
|
||||
"tecna_t3": {"c": TecnaMarpossProvasetT3, "k": {"paused": True}},
|
||||
"vision_saver": {"c": VisionSaver, "t": False},
|
||||
"vision": {"c": Vision, "k": {"paused": True}},
|
||||
}
|
||||
|
|
|
|||
|
|
@ -91,7 +91,7 @@ class Test_Leak(Test_Test):
|
|||
if d.get("Running test: active phase", None) in {
|
||||
"WAITING START",
|
||||
"ATTESA START",
|
||||
"WAITING THE START OF A NEW TEST"
|
||||
"END TEST, WAITING THE START OF A NEW TEST"
|
||||
"FINE TEST",
|
||||
}:
|
||||
if self.parent_assembly_widget is not None:
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user