[machine]
description = ST-TEN-10
instruction_folder = st-ten-10
image_for_warning= st-ten-10

[hardware_config]
pipe_cutter: present
archive_synchronizer: present
label_printer: present
label_printer_2: present  # Brother label printer used only in st-ten-10
remote_api: absent
tecna_t3: absent
furness_controls: absent
barcode_recipe_selection : absent
digital_io: absent # used only for instruction images
leak_disabled: active  #disable the tecna_t3 and furness_controls from starting by setting the tester-component to None


[archive_synchronizer]
archive_endpoint: https://r5portal.it/api/st-ten-save/
poll_time: 10
hold_time: 10

#[furness_controls]
#port: COM3
#model: fco730

[label_printer]
platform: windows
printer: Brother QL-700

[digital_io]
# OUTPUT MAP FOR EXTERNAL FLUSH/BLOW UNIT
id_flush_blow: USB-5860,BID#0
blow_on: 3 # INPUT VALVE TO SERVICE AIR
out_channel_select: 2 # AIR OUT VALVE (0=CH1, 1=CH2)
in_channel_select: 0 # AIR IN VALVE (0=CH1, 1=CH2)
flush_on: 1 # OUTPUT VALVE TO DIRT COLLECTOR
blow_led:7 # CLEAN INDICATOR
ch1_led:6 # CHANNEL 1 ACTIVE INDICATOR
ch2_led:5 # CHANNEL 2 ACTIVE INDICATOR
flush_led:4 # FLUSH INDICATOR

# OUTPUT MAP FOR FIXTURE CONNECTOR
id: USB-5862,BID#0
discard_idx:12 # BIT NUMBER OF THE I/0 MODULE USED FOR DISCARD SENSING

[fixture_rfid]
port: COM5

[recipe]
recipe_name_field: cod finito cliente
part_number_field: cod finito r5
barcode_enable_field: verifica_codice_a_barre_abilitata
barcode_serial_field: barcode_input_guaina
label_template_field: etichetta interoperazionale
warning_image_field: immagine_guaina
description_field: cod semilavorato costampato
#R56400/1-19032400265
#R56411/1-19032400265
#R56500/1-19032400265

[recipes_defaults]
descrizione:
prova_tenuta_abilitata:
istruzione_abilitata:
verifica_codice_a_barre_abilitata:x
warning_img:immagine_warning
tempo_pre_riempimento: 0
pressione_pre_riempimento: 1000
tempo_riempimento: 10
tempo_assestamento: 10
percentuale_minima_pressione_assestamento: 5
percentuale_massima_pressione_assestamento: 5
tempo_di_test: 10
pressione_di_test_delta_minimo: 30
pressione_di_test: 15000
pressione_di_test_delta_massimo: 30
tempo_svuotamento: 1
pressione_svuotamento: 100
canale_di_prova: 0
n_componenti: 1
tester_discharge_enable: yes
tagliatubi: x
lunghezza_corrugato:1000
diametro_corrugato:21

[autotest_leak]
enabled: false

[pipe_cutter]
method: rtu
port: COM4
baudrate: 38400
stopbits: stopbits_one
parity: parity_none
bytesize: eightbits
timeout: 1