st-ten-1/config/machine_settings/st-ten-1.ini

[machine]
description = ST-TEN-1
instruction_folder = st-ten-1
image_for_warning= st-ten-1

[hardware_config]
archive_synchronizer: present
archive_synchronizer_extra: present
galaxy_camera: absent
uvc_camera: absent
label_printer: present
neo_pixels: absent
remote_api: absent
tecna_t3: present
vision_saver: absent
vision: absent
screwdriver: present
fixture_id: present
digital_io: present
external_flush_blow: absent
barcode_recipe_selection: present

# VERO PROJECT LOCAL SERVER
[archive_synchronizer_extra]
portal_address: http://172.20.3.13:45006/
poll_time: 10
hold_time: 10

[tecna_t3]
port: COM4
model: t3l

[fixture_rfid]
port: COM5

[digital_io]
# OUTPUT MAP FOR FIXTURE CONNECTOR
id: USB-5862,BID#0
discard_idx:12 # BIT NUMBER OF THE I/0 MODULE USED FOR DISCARD SENSING

[recipe]
recipe_name_field: codice_ricetta
part_number_field: part_number
label_template_field: modello_etichetta
description_field: descrizione

[label_printer]
platform: windows
printer: zd420

[recipes_defaults]
tester_discharge_enable: yes
codice_ricetta: specificare ricetta
cliente: IVECO
part_number: specificare part number
canale_di_prova: 0
warning_img:

dimensione_lotto_abilitata:
n_componenti:1
istruzione_abilitata: x
numero nastri (n):0
numero sensori anello (sa):0
numero sensori presenza (sp):0

prova_tenuta_abilitata: x
tempo_pre_riempimento: 0
pressione_pre_riempimento: 5000
tempo_riempimento: 5
tempo_assestamento: 10
percentuale_minima_pressione_assestamento: 5
percentuale_massima_pressione_assestamento: 5
tempo_di_test: 10
pressione_di_test_delta_minimo: 30
pressione_di_test: 5000
pressione_di_test_delta_massimo: 30
tempo_svuotamento: 1
pressione_svuotamento: 100

prova_tenuta_abilitata_2:
tempo_pre_riempimento_2: 0
pressione_pre_riempimento_2: 1000
tempo_riempimento_2: 5
tempo_assestamento_2: 5
percentuale_minima_pressione_assestamento_2: 5
percentuale_massima_pressione_assestamento_2: 5
tempo_di_test_2: 5
pressione_di_test_delta_minimo_2: 200
pressione_di_test_2: 1000
pressione_di_test_delta_massimo_2: 200
tempo_svuotamento_2: 1
pressione_svuotamento_2: 100

stampa_etichetta_abilitata: x
modello_etichetta: ETA30x16_203dpi.prn
descrizione: inserire descrizione ricetta

[autotest_leak]
enabled: true
pre_filling_time: 0
pre_filling_pressure: 1000
filling_time: 10
settling_time: 10
settling_pressure_min_percent: 5
settling_pressure_max_percent: 5
test_pressure: 7000
test_time: 10
test_pressure_qpos: 5 #Q+ Upper test leak limit
test_pressure_qneg: 17 #Q- Lower test leak limit
test_pressure_tt_qpos: 5 # Q+ Upper test leak limit (tube-tube)
test_pressure_tt_qneg: 5 # Q- Lower test leak limit (tube-tube)
flush_time: 1
flush_pressure: 100
relay_config: 1
machine description 2022-10-12 14:23:34 +00:00			`[machine]`
			`description = ST-TEN-1`
update ini files for instruction folder 2024-02-06 11:42:39 +00:00			`instruction_folder = st-ten-1`
image_for_warnig uddate every machi has his own folder the images, also addede warnig images for ST-TEN-10 a last update csv for it 2024-05-08 05:46:03 +00:00			`image_for_warning= st-ten-1`
machine description 2022-10-12 14:23:34 +00:00
wip 2022-08-24 11:22:16 +00:00			`[hardware_config]`
machine description 2022-10-12 14:23:34 +00:00			`archive_synchronizer: present`
extra server on stten1/4/14 tbt 2024-12-06 10:46:06 +00:00			`archive_synchronizer_extra: present`
Update machine settings in st-ten-11.ini and st-ten-1.ini This commit includes key changes in the machine settings files st-ten-11.ini and st-ten-1.ini. We removed several parameters from the [digital_io] section in st-ten-11.ini and also updated the 'tester_discharge_enable' value to 'yes'. In st-ten-1.ini, the 'galaxy_camera' and 'screwdriver' settings were respectively altered to 'absent' and 'absent'. 2024-07-10 07:56:39 +00:00			`galaxy_camera: absent`
stten1 2024-06-27 11:46:14 +00:00			`uvc_camera: absent`
wip 2022-08-24 11:22:16 +00:00			`label_printer: present`
stten1 2024-06-27 11:46:14 +00:00			`neo_pixels: absent`
cfg fix 2022-09-22 15:47:37 +00:00			`remote_api: absent`
wip 2022-08-24 11:22:16 +00:00			`tecna_t3: present`
stten1 2024-06-27 11:46:14 +00:00			`vision_saver: absent`
			`vision: absent`
stten1 fix 2024-10-04 06:40:12 +00:00			`screwdriver: present`
stten1 2024-06-27 11:46:14 +00:00			`fixture_id: present`
			`digital_io: present`
			`external_flush_blow: absent`
stten1 2024-10-01 11:08:49 +00:00			`barcode_recipe_selection: present`
wip 2022-08-24 11:22:16 +00:00
extra server on stten1/4/14 tbt 2024-12-05 16:31:49 +00:00			`# VERO PROJECT LOCAL SERVER`
			`[archive_synchronizer_extra]`
ST TEN 14 2024-12-06 13:32:19 +00:00			`portal_address: http://172.20.3.13:45006/`
extra server on stten1/4/14 tbt 2024-12-05 16:31:49 +00:00			`poll_time: 10`
			`hold_time: 10`

dev 2022-07-28 10:27:54 +00:00			`[tecna_t3]`
upload ok 2022-10-20 07:20:43 +00:00			`port: COM4`
cfg fix 2022-09-22 15:47:37 +00:00			`model: t3l`
dev 2022-07-28 10:27:54 +00:00
stten1 2024-06-27 11:46:14 +00:00			`[fixture_rfid]`
upload ok 2022-10-20 07:20:43 +00:00			`port: COM5`

stten1 2024-06-27 11:46:14 +00:00			`[digital_io]`
			`# OUTPUT MAP FOR FIXTURE CONNECTOR`
st-ten-15 2025-01-30 09:32:31 +00:00			`id: USB-5862,BID#0`
stten1 2024-06-27 11:46:14 +00:00			`discard_idx:12 # BIT NUMBER OF THE I/0 MODULE USED FOR DISCARD SENSING`

upload ok 2022-10-20 07:20:43 +00:00			`[recipe]`
test himatic import 2022-11-04 17:20:32 +00:00			`recipe_name_field: codice_ricetta`
fix csv import 2025-01-07 14:43:29 +00:00			`part_number_field: part_number`
test himatic import 2022-11-04 17:20:32 +00:00			`label_template_field: modello_etichetta`
			`description_field: descrizione`
dev 2022-10-28 15:34:26 +00:00
			`[label_printer]`
			`platform: windows`
			`printer: zd420`
dev stten1 2023-05-22 07:23:37 +00:00
			`[recipes_defaults]`
stten1 2024-06-27 11:49:18 +00:00			`tester_discharge_enable: yes`
dev stten1 2023-05-22 07:23:37 +00:00			`codice_ricetta: specificare ricetta`
			`cliente: IVECO`
			`part_number: specificare part number`
flush_blow option wip 2023-07-22 10:42:25 +00:00			`canale_di_prova: 0`
dev stten1 2023-05-22 07:23:37 +00:00			`warning_img:`

			`dimensione_lotto_abilitata:`
supporto assemblati whip 2024-05-21 05:56:15 +00:00			`n_componenti:1`
dev stten1 2023-05-22 07:23:37 +00:00			`istruzione_abilitata: x`
			`numero nastri (n):0`
			`numero sensori anello (sa):0`
			`numero sensori presenza (sp):0`

			`prova_tenuta_abilitata: x`
			`tempo_pre_riempimento: 0`
			`pressione_pre_riempimento: 5000`
			`tempo_riempimento: 5`
			`tempo_assestamento: 10`
			`percentuale_minima_pressione_assestamento: 5`
			`percentuale_massima_pressione_assestamento: 5`
			`tempo_di_test: 10`
			`pressione_di_test_delta_minimo: 30`
			`pressione_di_test: 5000`
			`pressione_di_test_delta_massimo: 30`
			`tempo_svuotamento: 1`
			`pressione_svuotamento: 100`

			`prova_tenuta_abilitata_2:`
			`tempo_pre_riempimento_2: 0`
			`pressione_pre_riempimento_2: 1000`
			`tempo_riempimento_2: 5`
			`tempo_assestamento_2: 5`
			`percentuale_minima_pressione_assestamento_2: 5`
			`percentuale_massima_pressione_assestamento_2: 5`
			`tempo_di_test_2: 5`
			`pressione_di_test_delta_minimo_2: 200`
			`pressione_di_test_2: 1000`
			`pressione_di_test_delta_massimo_2: 200`
			`tempo_svuotamento_2: 1`
			`pressione_svuotamento_2: 100`

			`stampa_etichetta_abilitata: x`
			`modello_etichetta: ETA30x16_203dpi.prn`
			`descrizione: inserire descrizione ricetta`

			`[autotest_leak]`
			`enabled: true`
			`pre_filling_time: 0`
			`pre_filling_pressure: 1000`
rfid beta 2023-06-28 17:49:13 +00:00			`filling_time: 10`
dev stten1 2023-05-22 07:23:37 +00:00			`settling_time: 10`
			`settling_pressure_min_percent: 5`
			`settling_pressure_max_percent: 5`
			`test_pressure: 7000`
rfid beta 2023-06-28 17:49:13 +00:00			`test_time: 10`
stten1 cfg 2024-12-17 11:29:43 +00:00			`test_pressure_qpos: 5 #Q+ Upper test leak limit`
			`test_pressure_qneg: 17 #Q- Lower test leak limit`
			`test_pressure_tt_qpos: 5 # Q+ Upper test leak limit (tube-tube)`
rfid beta 2023-06-28 17:49:13 +00:00			`test_pressure_tt_qneg: 5 # Q- Lower test leak limit (tube-tube)`
dev stten1 2023-05-22 07:23:37 +00:00			`flush_time: 1`
			`flush_pressure: 100`
			`relay_config: 1`