st-ten-1/config/machine_settings/st-ten-10.ini

[machine]
description = ST-TEN-10
instruction_folder = st-ten-10
image_for_warning= st-ten-10

[hardware_config]
pipe_cutter: present
archive_synchronizer: present
label_printer: present
label_printer_2: present  # Brother label printer used only in st-ten-10
remote_api: absent
tecna_t3: absent
furness_controls: absent
barcode_recipe_selection : absent
digital_io: absent # used only for instruction images
leak_disabled: active  #disable the tecna_t3 and furness_controls from starting by setting the tester-component to None


[archive_synchronizer]
archive_endpoint: https://r5portal.it/api/st-ten-save/
poll_time: 10
hold_time: 10

#[furness_controls]
#port: COM3
#model: fco730

[label_printer]
platform: windows
printer: Brother QL-700

[digital_io]
# OUTPUT MAP FOR EXTERNAL FLUSH/BLOW UNIT
id_flush_blow: USB-5860,BID#0
blow_on: 3 # INPUT VALVE TO SERVICE AIR
out_channel_select: 2 # AIR OUT VALVE (0=CH1, 1=CH2)
in_channel_select: 0 # AIR IN VALVE (0=CH1, 1=CH2)
flush_on: 1 # OUTPUT VALVE TO DIRT COLLECTOR
blow_led:7 # CLEAN INDICATOR
ch1_led:6 # CHANNEL 1 ACTIVE INDICATOR
ch2_led:5 # CHANNEL 2 ACTIVE INDICATOR
flush_led:4 # FLUSH INDICATOR

# OUTPUT MAP FOR FIXTURE CONNECTOR
id: USB-5862,BID#0
discard_idx:12 # BIT NUMBER OF THE I/0 MODULE USED FOR DISCARD SENSING

[fixture_rfid]
port: COM5

[recipe]
recipe_name_field: cod finito cliente
part_number_field: cod finito r5
barcode_enable_field: verifica_codice_a_barre_abilitata
barcode_serial_field: barcode_input_guaina
label_template_field: etichetta interoperazionale
warning_image_field: immagine_guaina
description_field: cod semilavorato costampato
#R56400/1-19032400265
#R56411/1-19032400265
#R56500/1-19032400265

[recipes_defaults]
descrizione:
prova_tenuta_abilitata:
istruzione_abilitata:
verifica_codice_a_barre_abilitata:x
warning_img:immagine_warning
tempo_pre_riempimento: 0
pressione_pre_riempimento: 1000
tempo_riempimento: 10
tempo_assestamento: 10
percentuale_minima_pressione_assestamento: 5
percentuale_massima_pressione_assestamento: 5
tempo_di_test: 10
pressione_di_test_delta_minimo: 30
pressione_di_test: 15000
pressione_di_test_delta_massimo: 30
tempo_svuotamento: 1
pressione_svuotamento: 100
canale_di_prova: 0
n_componenti: 1
tester_discharge_enable: yes
tagliatubi: x
lunghezza_corrugato:1000
diametro_corrugato:21

[autotest_leak]
enabled: false

[pipe_cutter]
method: rtu
port: COM4
baudrate: 38400
stopbits: stopbits_one
parity: parity_none
bytesize: eightbits
timeout: 1
st-ten-10 wip 2024-03-12 12:48:00 +00:00			`[machine]`
			`description = ST-TEN-10`
			`instruction_folder = st-ten-10`
image_for_warnig uddate every machi has his own folder the images, also addede warnig images for ST-TEN-10 a last update csv for it 2024-05-06 11:29:52 +00:00			`image_for_warning= st-ten-10`
st-ten-10 wip 2024-03-12 12:48:00 +00:00
			`[hardware_config]`
dev pipe 2025-01-23 09:58:14 +00:00			`pipe_cutter: present`
Add machine status tracking and update for ArchiveSynchronizer The ArchiveSynchronizer now tracks machine status and sends updates about it. Options of status are tracked as "working", "logged-in", and "logged-out". This implementation includes configuration changes for the st-ten-10 machine and error reporting for failures during remote archive operations. 2024-04-23 09:15:23 +00:00			`archive_synchronizer: present`
st-ten-10 wip 2024-03-12 12:48:00 +00:00			`label_printer: present`
			`label_printer_2: present # Brother label printer used only in st-ten-10`
			`remote_api: absent`
			`tecna_t3: absent`
			`furness_controls: absent`
supporto assemblati whip 2024-05-21 06:45:27 +00:00			`barcode_recipe_selection : absent`
fix 2024-05-14 04:15:18 +00:00			`digital_io: absent # used only for instruction images`
st-ten-10 wip 2024-03-12 12:48:00 +00:00			`leak_disabled: active #disable the tecna_t3 and furness_controls from starting by setting the tester-component to None`


			`[archive_synchronizer]`
st ten 10 2024-05-09 10:07:15 +00:00			`archive_endpoint: https://r5portal.it/api/st-ten-save/`
Add machine status tracking and update for ArchiveSynchronizer The ArchiveSynchronizer now tracks machine status and sends updates about it. Options of status are tracked as "working", "logged-in", and "logged-out". This implementation includes configuration changes for the st-ten-10 machine and error reporting for failures during remote archive operations. 2024-04-23 09:15:23 +00:00			`poll_time: 10`
			`hold_time: 10`
st-ten-10 wip 2024-03-12 12:48:00 +00:00
			`#[furness_controls]`
			`#port: COM3`
			`#model: fco730`

			`[label_printer]`
			`platform: windows`
			`printer: Brother QL-700`

			`[digital_io]`
			`# OUTPUT MAP FOR EXTERNAL FLUSH/BLOW UNIT`
			`id_flush_blow: USB-5860,BID#0`
			`blow_on: 3 # INPUT VALVE TO SERVICE AIR`
			`out_channel_select: 2 # AIR OUT VALVE (0=CH1, 1=CH2)`
			`in_channel_select: 0 # AIR IN VALVE (0=CH1, 1=CH2)`
			`flush_on: 1 # OUTPUT VALVE TO DIRT COLLECTOR`
			`blow_led:7 # CLEAN INDICATOR`
			`ch1_led:6 # CHANNEL 1 ACTIVE INDICATOR`
			`ch2_led:5 # CHANNEL 2 ACTIVE INDICATOR`
			`flush_led:4 # FLUSH INDICATOR`

			`# OUTPUT MAP FOR FIXTURE CONNECTOR`
st-ten-15 2025-01-30 09:32:31 +00:00			`id: USB-5862,BID#0`
st-ten-10 wip 2024-03-12 12:48:00 +00:00			`discard_idx:12 # BIT NUMBER OF THE I/0 MODULE USED FOR DISCARD SENSING`

			`[fixture_rfid]`
			`port: COM5`

			`[recipe]`
fix 2024-06-26 10:14:04 +00:00			`recipe_name_field: cod finito cliente`
			`part_number_field: cod finito r5`
st ten 10 wip 2024-03-19 13:23:58 +00:00			`barcode_enable_field: verifica_codice_a_barre_abilitata`
st ten 10 2024-05-09 10:07:15 +00:00			`barcode_serial_field: barcode_input_guaina`
fix 2024-06-26 10:14:04 +00:00			`label_template_field: etichetta interoperazionale`
Update printing labels and warning images in config files Updated the printing labels in the brother_label_printer.py file and added warning images fields across multiple configuration files. This includes changes in machine settings for st-ten-3.ini, st-ten-2.ini and st-ten-10.ini. Also, modified the "labeltxt_5" field in the test.py file and in recipe_selection.py to fetch the correct value. 2024-05-08 09:46:03 +00:00			`warning_image_field: immagine_guaina`
fix 2024-06-26 10:14:04 +00:00			`description_field: cod semilavorato costampato`
fix 2024-05-14 04:15:18 +00:00			`#R56400/1-19032400265`
supporto assemblati whip 2024-05-23 12:09:49 +00:00			`#R56411/1-19032400265`
			`#R56500/1-19032400265`
st-ten-10 wip 2024-03-12 12:48:00 +00:00
st ten 10 wip 2024-03-14 12:15:08 +00:00			`[recipes_defaults]`
			`descrizione:`
st ten 10 wip 2024-03-19 13:23:58 +00:00			`prova_tenuta_abilitata:`
Update machine settings configuration A modification has been made to the `st-ten-10.ini` configuration file under the `machine_settings` directory. The `istruzione_abilitata` field under `recipes_defaults` has been updated to be empty indicating likely disabling of a certain feature or instruction. 2024-05-08 10:42:40 +00:00			`istruzione_abilitata:`
st ten 10 wip 2024-03-19 13:23:58 +00:00			`verifica_codice_a_barre_abilitata:x`
Update printing labels and warning images in config files Updated the printing labels in the brother_label_printer.py file and added warning images fields across multiple configuration files. This includes changes in machine settings for st-ten-3.ini, st-ten-2.ini and st-ten-10.ini. Also, modified the "labeltxt_5" field in the test.py file and in recipe_selection.py to fetch the correct value. 2024-05-08 09:46:03 +00:00			`warning_img:immagine_warning`
st-ten-10 wip 2024-03-12 12:48:00 +00:00			`tempo_pre_riempimento: 0`
st ten 10 wip 2024-03-14 12:15:08 +00:00			`pressione_pre_riempimento: 1000`
			`tempo_riempimento: 10`
st-ten-10 wip 2024-03-12 12:48:00 +00:00			`tempo_assestamento: 10`
			`percentuale_minima_pressione_assestamento: 5`
			`percentuale_massima_pressione_assestamento: 5`
st ten 10 wip 2024-03-14 12:15:08 +00:00			`tempo_di_test: 10`
			`pressione_di_test_delta_minimo: 30`
			`pressione_di_test: 15000`
			`pressione_di_test_delta_massimo: 30`
st-ten-10 wip 2024-03-12 12:48:00 +00:00			`tempo_svuotamento: 1`
			`pressione_svuotamento: 100`
st ten 10 wip 2024-03-14 12:15:08 +00:00			`canale_di_prova: 0`
supporto assemblati ok 2024-05-28 05:35:58 +00:00			`n_componenti: 1`
st ten 10 wip 2024-03-14 12:15:08 +00:00			`tester_discharge_enable: yes`
pipe cutter wip 2025-01-17 14:14:28 +00:00			`tagliatubi: x`
pipe cutter test ok recipe ok need calibration for first cut 2025-01-27 13:42:18 +00:00			`lunghezza_corrugato:1000`
pipe cutter wip 2025-01-17 14:14:28 +00:00			`diametro_corrugato:21`
st-ten-10 wip 2024-03-12 12:48:00 +00:00
			`[autotest_leak]`
			`enabled: false`
pipe cutter wip 2025-01-17 14:14:28 +00:00
			`[pipe_cutter]`
dev TODO test for tecna compatibility 2025-01-21 14:44:47 +00:00			`method: rtu`
dev 2025-01-24 07:21:22 +00:00			`port: COM4`
dev TODO test for tecna compatibility 2025-01-21 14:44:47 +00:00			`baudrate: 38400`
			`stopbits: stopbits_one`
			`parity: parity_none`
			`bytesize: eightbits`
			`timeout: 1`